The quality Anti-corrosion pipeline is a kind of steel pipe, so it must be neat and tidy when stored and placed in a dry environment.
1. The principle requirement of quality Anti-corrosion pipeline stacking is to stack according to varieties and specifications under the premise of stable stacking and ensuring safety. Different types of materials should be stacked separately to prevent muddling and mutual erosion;

2. It is forbidden to store items that are corrosive to steel around the quality Anti-corrosion pipeline stacks;
3. The bottom of the quality Anti-corrosion pipeline should be high, firm and flat to prevent the material from being damp or deformed;
4. The same materials are stacked separately according to the order of storage;
5. For quality Anti-corrosion pipeline section steel stacked in the open air, there must be wooden mats or stones underneath, and the stacking surface is slightly inclined to facilitate drainage, and pay attention to the flat and straight materials to prevent bending and deformation;
6. The stacking height of the quality Anti-corrosion pipeline should not exceed 1.2m for manual work, 1.5m for mechanical work, and 2.5m in stack width;
7. There should be a certain passage between the stack and the stack, the inspection channel is generally 0.5m, and the access channel depends on the size of the material and the transportation machinery, generally 1.5～2.0m;
8. The angle steel and channel steel stacked in the open should be laid down, that is, the mouth should be facing down, the I-beam should be placed upright, and the I-slot surface of the steel should not be facing upwards to avoid rusting due to the accumulation of water;
9. The bottom of the quality Anti-corrosion pipeline stack should be raised. If the warehouse is a sunny concrete floor, the height of 0.1m should be enough; if it is a muddy floor, it should be raised by 0.2~0.5m. If it is an open field, the cement floor shall be elevated by 0.3-0.5m, and the sand-mud surface shall be elevated by 0.5-0.7m.