Good price and quality stainless steel TEE are mainly different in material. The chemical composition of stainless steel will keep the surface of stainless steel TEE from being corroded and rusted for a long time. We also need to pay attention to cleaning and installation. When installing stainless steel tees, we all need to pay attention to the following.

1. Before installation, you must carefully check the various standards of good price and quality stainless steel TEE, whether the diameter meets the requirements for use, eliminate the defects caused by the transportation process, and eliminate the dirt of the stainless steel tee, make preparations before installation, everything Ready.

  2, during installation, good price and quality stainless steel TEE can be directly installed on the pipeline according to the connection method, and the installation is carried out according to the used position. Under normal circumstances, it can be installed at any position in the pipeline, but it needs easy-to-operate maintenance. Note that the medium flow direction of the cut-off stainless steel tee should be upwards from under the vertical valve flap. The stainless steel tee can only be installed horizontally.

  3, good price and quality stainless steel TEE valve packing gland bolts should be evenly tightened, and should not be pressed into a crooked state, so as to avoid bruising, hindering the movement of the valve stem or causing leakage.

  4, good price and quality stainless steel TEE ball valves, globe valves and gate valves are only fully open or fully closed when used, and are not allowed to adjust the flow rate, so as to avoid erosion of the sealing surface and accelerate wear. There is an inverted sealing device in the gate valve and the upper threaded stop valve, and the handwheel is turned to the very upper position and tightened to prevent the medium from leaking from the packing.

Good price and quality stainless steel TEE is different from carbon steel tees mainly in the material. The chemical composition of stainless steel will keep the surface of alloy steel tees from being corroded or rusted for a long time, but when cleaning and installing, we Also need to pay attention.