The quality Reducing TEE is a section of main pipe plus a small branch pipe. If Reducing TEE is used, as long as the debris in the pipe moves with the oxygen flow, the change in flow rate due to the change of pipe diameter may cause collision between the debris and the pipe. Fire source Or electrostatic discharge due to changes in flow rate may cause the pure oxygen tube to catch fire. The Reducing TEE processing method is suitable for the processing of reducing tee on pipes of different specifications; its special processing equipment has simple structure and low cost. The manufacture of Reducing TEE does not require additional injection molding machines and injection molds, which can reduce the production cost of such pipe fittings. Increase productivity.

Reducing TEE processing method is: mark on the pipe where Reducing TEE is to be processed, and punch through the mark. Special equipment for quality Reducing TEE: Install an ejector device on the pipeline, which includes metal rods, pushers, commutators, brackets, etc.; heat the metal rods and use jacks and metal rods to push out the pipe wall The quality Reducing TEE blank formed by naturally turning out the material; then a certain length of the pipe section of the corresponding specification is welded on the reducing tee blank formed by the ejection to produce the final product.

For quality Reducing TEE, for example, "T4×4×3.5" means Reducing TEE with the same diameter of four inches and the different diameter of 3.5 inches. The material is generally 10# 20# A3 Q235A 20g 20G 16Mn ASTM A234 ASTM A105 ASTM A403, etc., pay attention to when processing, Reducing TEE has a long service life.