Customized stainless steel elbow is a commonly used pipe type in pipe structure, which is very common in pipe steering connections. According to the viewing angle, the elbow is usually 30 degree stainless steel elbow, 45 degree stainless steel elbow, 60°elbow, 90°elbow, 180°elbow.

Before installing the customized stainless steel elbow, make sure that all sides of the stainless steel elbow meet the requirements for use. To repair all defects caused during transportation, the surface of the stainless steel elbow must be cleaned. When you are ready, you can install it.

Please install the customized stainless steel elbow directly in the pipeline through the connection method according to the place of use. During installation, it is important to ensure air tightness and to avoid leakage. Otherwise, the normal operation of the pipeline will be affected. In order to prevent the valve stem from moving and leaking, the valve packing bolts on the customized stainless steel elbow must be tightened to avoid skewing. When using a valve, do not use it to adjust the flow rate to prevent corrosion of the sealing surface.

The long-term storage of customized stainless steel elbow should be checked in time. Usually open to the outside of the manufactured and processed surface. It should be cleaned to remove dirt and kept clean in a well-ventilated room. Stacking and outdoor storage are prohibited. Customized stainless steel elbow is usually kept dry, ventilated, and stored in the correct storage method.