Reducing TEE is a kind of tee, which is the branch pipe and the other two tee fittings with different diameters.

Usually when choosing Reducing TEE specifications, we need to know what pipelines and fittings to use through drawings, and we need to understand the typical construction and current implementation history. For example, we will not accept Reducing TEE for drainage pipes. Even if the connected branch pipe is smaller than the main pipe, the diameter can only be changed by filling the core; as for the elbow, the typical requirement is that the pipe larger than DN100 turns a 90° bend. Only two 45° elbows can be used.

In principle, the address used to Reducing TEE can also be a combination of popular three links and variable diameters, but this is very luxurious and unnecessary. At this time, Reducing TEE is appropriate. Reducing TEE and tee have different pipe diameters. For example, the vertical pipe is de110 and the horizontal branch pipe is de75. This is Reducing TEE. The equal diameter is the same as this. If both are marked de110, it is equal diameter; so When we manipulate Reducing TEE, we need to manipulate it according to the actual situation. We should also accept other three links at other times.