Best 45D elbow is a commonly used connecting pipe fitting in pipeline installation. It connects two pipes with the same or different nominal diameters so that the pipes are bent at a certain angle.

  1. Best 45D elbow processing has high production efficiency, convenient operation, and easy realization of mechanization and automation. This is because stamping relies on punching dies and stamping equipment to complete the processing. The number of strokes of an ordinary press can reach dozens of times per minute. The pressure can reach hundreds or even thousands of times per minute, and it is possible to obtain stamped parts in each stamping stroke.

  2. Best 45D elbow generally has no chips, less waste, and no other heating equipment. It is a material-saving and energy-saving processing method, and the cost of stamping parts is low.

  3.Best 45D elbow parts with more complex shapes can be processed in a large range of sizes, such as stopwatches as small as large clocks, covering parts, automobile longitudinal beams, etc., as well as the hardening effect and cold deformation of the material during the stamping process, and the stamping stiffness And the intensity is very high.

  4. Since the mold guarantees the shape and dimensional accuracy of the Best 45D elbow, and usually does not damage the surface quality of the stamping parts, and the mold life is usually longer, the stamping interchangeability is good, the quality is stable, and the "same" characteristic.